ARMTEL TOP-PAD-IP2, Руководство пользователя

Страница: 56 / 68

TOP-PAD-IP2 DESKTOP INTERCOM STATION
User Manual
page 54/64 armtel.com
© Armtel info@armtel.com
The left (1) and right (2) brackets provided are adjusted with the mounting plate (3)
(see Figure C.3 ) by the screws provided and fixed to the wall through the holes (4). After
fixing the brackets, the mounting plate is removed.
Figure C.3 – Brackets for wall-mounting of TOP-PAD-IP2
In the holes 1, 4, 5, 8 on the bottom side of TOP-PAD-IP2 (see Figure C.1 ) 3 × 8 mm
plastic screws provided are inserted, in such a way that the head of the screw does not reach
the plane of the base to 2-3 mm, after which the heads of the screws are flush-mounted
into the holes (5) – see Figure C.3 , and the Desktop intercom station unit is fixed to
the brackets by the downward movement. In the case of a backlash of any side of the unit,
the corresponding screw should be tightened up to 1-2 turns.
After installation, fix the removable microphone (refer 1.2.4 ) proved on the front surface
of the Desktop intercom station.
Note –
With a wall-mounted Desktop intercom station a shortened version of G14-3
microphone can be supplied upon request
.