8
NOTICE:
Before using the blower, read all safety precautions and follow the instructions in the
Battery Pack and Charger sections. The battery pack is not fully charged when it is purchased.
CAUTION:
If the tool is operated continuously until the battery pack has run out of
charge, rest the tool for at least 15 minutes before inserting a new battery.
OPERATION
1. To install the battery pack, firmly grasp the blower and align the tongue on the battery pack with
the groove on the tool housing and slide it into place. Insert it all the way until it locks in place
with a click (Fig. 2).
2. To remove the battery pack, slide it from the tool while pressing the release button on the front
of the pack (Fig. 3).
The air volume of the blower can be adjusted by turning the air volume adjustment dial found
on top of the handle. The blower has 6 air volume settings ranging from 1 (low speed) to 6 (high
speed) (Fig. 4).
1. Make sure the battery is correctly installed. For installation instructions, see page 8.
2. To turn on the blower, press and release the trigger switch (Fig. 4).
3. To turn off the blower, press and release the trigger switch again.
INSTALLING & REMOVING BATTERY PACK
AIR VOLUME ADJUSTMENT DIAL
OPERATING THE BLOWER
2
3
4
Trigger switch
Air volume adjustment dial
