SECTION 4
NETWORKING
PAGE 88
9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev B
8.
Reinstall the compartment cover with 12
Philips screws.
9.
Reinstall the batteries and connect
external power if desired.
Once your card is installed, you are ready to activate your network connection. Follow the
procedure in
Connecting to a WWAN
Table 12 to activate a network connection. Click on the
Help
button on the Sierra
connection manager page for detailed information on operating and troubleshooting your
WWAN connection.
Table 12. Activating your WWAN Network Connection
STEP
ACTION
CONDITION OR INDICATION
1.
Select
Start
à
All Programs
à
OneClick Internet Connection
Manager
The Sierra® OneClick™ Internet
Connection Manager window opens, as
shown in Figure 52.
2.
Select
Settings
and then click on the
General
tab.
The Settings window opens, as shown in
Figure 53.
3.
Select the desired options and then
click on the
at the top right of the
window to return to the main window.
Selecting the
Gobi NDIS Auto Connect
option turns on the WWAN radio even before the OS
starts. This is not always a desirable state, so choose NDIS only if needed. Because NDIS
enables the Gobi WWAN
Gobi NDIS Auto Connect
hardware
The
Auto Launch
option is not recommended for use with NDIS as it will launch the Connection
Manager application upon reboot, restarting the connection.
to connect, reconnect and roam automatically, you do not
need to select those options if you use the NDIS option.
Select the
Roaming Alert
option if you wish to be alerted when roaming.
