8
Manual Armon Edero Version 1.5
Date: October 2018
Safety:
•
The arm support works with a spring compensation mechanism. Hence it gets the energy for the
compensation out of springs. When the upperarm of the arm support is down in any way, there will be
tension on the springs. When the arm support isn’t used, always bring the upper arm of the arm support
back into its most upwards position so that there is no tension on the springs.
•
When getting the a
rm support out of a ‘parked’ postion, make sure the
arm is placed properly in the brace,
and therefore the compensation force sufficiently compensated , before you start moving the arm support
out of its parked position.
•
Always be aware of the tension of the springs when the upper arm is in a downwards position.
•
The arm support may only be used for the proposed purpose. Any type of use which is not specified in this
manual, will be considered as improper use. The customer is solely responsible for material damage and
injury of persons resulting from improper use; Armon Products will not be liable under any circumstance.
•
Assembly, commissioning and maintenance should only be carried out by trained specialists.
•
In any circumstance, do not open the housing of the arm support. Warranty is void in such case.
•
Do not use the arm support in environments exposed to corrosion hazards.
•
Protect the arm support against sand, vapours and dust.
Liability:
To the maximum extent permitted by applicable law, in no event will Armon Products or its suppliers or resellers be
liable for any indirect, special, incidental or consequential damages arising from the use of or inability to use the
product, including, without limitation, damages for loss of goodwill, work and productivity, computer failure or
malfunction, or any and all other commercial damages or losses, even if advised of the possibility thereof, and
regardless of the legal or equitable theory (contract, tort or otherwise) upon which the claim is based. In any case,
Armon Products’s entire liability under any provision of this agreement shall not exceed in the aggregate the sum of
the fees paid for this product and fees for support of the product received by Armon Products under a separate
support agreement (if any), with the exception of death or personal injury caused by the negligence of Armon
Products to the extent applicable law prohibits the limitation of damages in such cases.
Armon Products cannot be held liable for any consequence resulting from incorrect information provided by its
personnel, or errors incorporated in this manual and / or other accompanying documentation (including commercial
documentation). The opposing party (product’s user or
its representative) shall disclaim Armon Products from all
claims arising from third parties, whatever nature or whatever relationship to the opposing party.
Any severe incident in relation to this product should be mentioned to the manufacturer and the competent national
authority
Warranty:
Warranty claims shall be voided in case:
•
The conditions in the operating manual are ignored
•
The appliance is used outside the described uses
•
Any part of the appliance is modified or opened
•
The appliance is inproperly set up or incorrectly electrically connected
Cleaning:
When cleaning the outer part of the Armon Edero and the brace, make sure to use a soft, clean cloth dampened with
lukewarm water and a non-abrasive liquid household cleaner.
