6
Manual Armon Edero Version 1.5
Date: October 2018
Adjust the level of weight compensation by following these steps:
1.
Pull the upperarm upwards in the direction of the green
arrow.
2.
Move the ring in the direction of the green arrows and
place it in the step of your choise.
3.
Let go of the upperarm. The Edero is ready for use.
ATTENTION!
Make sure you do not pull the complete base
with the Edero Pin out of the links. Please check after every weight
compensation adjustment if the pin is still placed in the links in the
right way. See point 5 and 6 of:
How to set up the Armon Edero
Placing the arm
Place the arm in the brace in the following way:
•
The underarm should lay in the brace
•
The upper arm should be placed against the upper arm support, not far above the elbow.
•
The elbow should be free.
•
The upper arm support consists out of not allergenic rubber with a stainless steel frame in it that can be bent
in any direction so that it is the most comfortable for the user
ATTENTION!
If you are not comfortable or sure how to properly place your arm into the Brace, please contact
your supplier. If you are not able to independently level your arm when the compensation force drops out, you
should not be using this product.
