MD16388
LIMITED LIFETIME WARRANTY & INSTRUCTIONS MANUAL
FEATURES
SELECTING FEATURES
SETTING THE TIME AND CALENDAR
EL LIGHT FEATURE
STOPWATCH
•
Time Telling Mode (Hours, Minutes, Seconds, Month, Date, and Day
of the Week)
•
(5) 24 Hour Alarms
•
Hourly Chime: One ‘Beep’ sound every full Hour
•
Chronograph: Hours, Minutes, Seconds, and 1/100 of a Second with
Lap Operation
•
Countdown Timer
•
World Time
•
Daylight Savings Time
•
Pedometer
•
12/24 Hour (Military Time)
•
Water Resistant as indicated on the watch
•
INSTALITE- Electro Luminescent Display
1.
Time Telling Mode displays Hours, Minutes, Seconds, Month, Date, and
Day of the Week.
2.
From Time Telling Mode, press ‘B’ once. Pedometer Mode appears.
Press ‘B’ six times to return to Time Telling Mode.
3.
From Time Telling Mode, press ‘B’ twice. Recall Pedometer Data Mode
appears. Press ‘B’ five times to return to Time Telling Mode.
4.
From Time Telling Mode, press ‘B’ three times. Alarm Mode appears.
Press ‘B’ four times to return to Time Telling Mode.
5.
From Time Telling Mode, press ‘B’ four times. Chronograph Mode ap-
pears. Press ‘B’ three times to return to Time Telling Mode.
6.
From Time Telling Mode, press ‘B’ five limes. Countdown Timer Mode
appears. Press ‘B’ twice to return to Time Telling Mode.
7.
From Time Telling Mode, press ‘B’ six times. World Time Mode appears.
Press ‘B’ once to return to Time Telling Mode.
1.
From Time Telling Mode, press and hold ‘A’ until the City Code flashes.
Press ‘C’ to select the City Code.
2.
Press ‘B’. Daylight Savings Time flashes. Press ‘C’ to activate or deacti-
vate Daylight Savings Time.
NOTE:
The Daylight Savings Time symbol appears when the Daylight
Savings Time is in effect.
3.
Press ‘B’. Seconds flash. Press ‘C’ to zero out the Seconds.
NOTE:
Zeroing out 30 or more seconds automatically adds one minute to
time.
4.
Press ‘B’. Hours flash. Press ‘C’ to advance the Hours.
NOTE:
When 12 Hour Format is selected, ‘AM’ indicates ‘a.m.’ times; ‘PM’
indicates ‘p.m.’ times.
5.
Press ‘B’. Minutes flash. Press ‘C’ to advance the Minutes.
NOTE:
Pressing and holding ‘C’ will advance digits rapidly.
6.
Press ‘B’. 12/24 Hour Time Format flashes. Press ‘C’ to select either 12
Hour or 24 Hour (Military) Time.
NOTE:
‘12’ indicates 12 Hour Format; ‘24’ indicates 24 Hour (Military
Time).
7.
Press ‘B’. The Year flashes. Press ‘C’ to advance the Year.
8.
Press ‘B’. Months flash. Press ‘C’ to advance the Month.
9.
Press ‘B’. The Date flashes. Press ‘C’ to advance the Date.
10.
Press ‘B’. The Unit flashes. Press ‘C’ to select the Unit (Inches or
Centimeters).
11.
Press ‘A’ to end sequence and return to Time Telling Mode.
1.
Press ‘D’ in any mode to illuminate the watch face. The backlight will
remain lit for 3 seconds.
NOTE:
Excessive use of the light will shorten battery life.
1.
From Time Telling Mode, press ‘II’ four times to enter the Stopwatch
Mode.
2.
Press ‘C’ to start timing.
3.
Press ‘C’ again to stop timing.
4.
Press ‘A’ to reset to zero.
5.
Press ‘B’ three times to return to Time Telling Mode.
SPLIT TIME
WORLD TIME
COUNTDOWN TIMER
SETTING THE 24 HOUR ALARMS
1.
While in the Stopwatch Mode, press ‘C’ to start timing.
2.
Press ‘A’ to measure and display Split Times.
3.
Press ‘C’ to stop timing at the end of the event and to reveal the final
Split Time.
4.
Press ‘A’ to reset to zero.
5.
Press ‘B’ three times to return to Time Telling Mode.
1.
From Time Telling Mode, press ‘B’ six times to enter the World Time
Mode
2.
Press ‘C’ to select the desired city. Based on the set time, the Hour is
automatically adjusted to display the local time in the newly selected city.
NOTE: One of 28 major cities may be selected: (PPG) Samoa, (HNL) Hono-
lulu, (ANC) Anchorage, (LAX) Los Angeles, (DEN) Denver, (CHI) Chicago,
(NYC) New York, (CCS) Caracas, (RIO) Rio de Janeiro, (LON) London, (PAR)
Paris, ( JRS) Jerusalem, (GAl) Cairo, (JED) Jeddah, (THR) Tehran, (DXB)
Dubai, (KBL) Kabul, (KHI) Karachi, (DEL) Delhi, (DAC) Dacca, (RGN) Yangon,
(BKK) Bangkok, (HKG) Hong Kong, (TYO) Tokyo, (ADL) Adelaide. (SYD)
Sydney, (NOU) Noumea, (WLG) Wellington.
3.
Press ‘B’ to return to Time Telling Mode.
1.
From Time Telling Mode, press ‘B’ five times to enter the Timer Mode.
2.
Press and hold ‘A’ until the Hours flash. Press ‘C’ to adjust the Hour.
3.
Press ‘B’. Minutes flash. Press ‘C’ to adjust Minutes.
4.
Press ‘B’. Seconds flash. Press ‘C’ to adjust the Seconds.
5.
When the Countdown Timer is set, press ‘A’ to end set sequence and
return to Timer Mode.
6.
Press ‘C’ to start the Countdown Timer.
7.
If desired, press ‘C’ again to stop the Countdown Timer. Press ‘C’ again
to resume the Countdown Timer.
NOTE:
The Countdown timing will continue in any made until ‘C’ is
pressed. When the Timer has expired, the alarm will sound for about 10
seconds or until any button is pressed.
8.
Press ‘C’ to stop the Timer.
9.
Press ‘B’ twice to return to Time Telling Mode.
1.
From Time Telling Mode, press ‘B’ three times to enter the Alarm Mode.
Press ‘A: then press ‘B’ to select the Alarm Number (Al-A5).
2.
Press and hold ‘A’ until the Alarm Hours flash. Press ‘C’ to advance the
Alarm Hours.
3.
Press ‘B’. Alarm Minutes flash. Press ‘C’ to advance the Alarm Minutes.
4.
Press ‘A’ to end sequence.
5.
Press ‘A’ again, then press ‘B’ four times to return to Time Telling Mode.
