manualshive.com logo in svg

Armitage Shanks Sensorflow 21 A4168AA, Руководство по установке

Поделиться
Скачать
Armitage Shanks Sensorflow 21 A4168AA Скачать руководство пользователя страница 2

2

TABLE OF CONTENT

1  IMPORTANT PRE-INSTALLATION NOTES ...................................... 3
2  PRODUCT BOX CONTENTS  ........................................................... 4
3  SUPPLY CONDITIONS ...................................................................... 5
4  WATER REGULATIONS .................................................................... 5
5  INSTALLATION GUIDE ...................................................................... 6

5.1  MOUNTING THE SENSORS ................................................................................7
5.2  PLUMBING OVERVIEW .......................................................................................8
5.3  ELECTRICAL CONNECTION .............................................................................10

6  SHOWER OPERATION ................................................................... 16
7  SENSOR RANGING & RUN TIME ADJUSTMENT ......................... 17
8  EXTENSION CABLES ..................................................................... 18
9 MAINTENANCE ............................................................................... 19

9.1  SOLENOID VALVE .............................................................................................19
9.2  HYGIENE FLUSH (AUTOMATIC) .......................................................................20
9.3  ISOLATING VALVE .............................................................................................21

10  CLEANING CHROME SURFACES ................................................. 21
11  SPARE PARTS ................................................................................. 22
12  SELECTION OF OUR FIXED SHOWER HEADS ............................ 23

Sensorflow 21 panel mount showering products

 

 

These panel mount Sensorflow 21 electronic showering products are designed for 

water economy & hygienic “no-touch” operation.

The shower is operated by the infrared sensor which detects the presence of the users hand in the sens-

ing region. When activated, water will flow from the shower head for the preset run-time.

     

These products are intended to be supplied with premixed or cold water.

   

These products are available in 3 versions: Mains powered (transformed) with option to link up to 5 link 

units & independent battery powered units:

A4168AA 

are supplied with

 battery unit

A4185AA 

are supplied with

 mains power unit

A4186AA 

are supplied with

 link unit 

(Link up to 5 per A4185AA)

NOTE:

 A suitable shower head (or shower kit) should be purchased  

            separately (a shower head is not included with this product).

            See section 12 for a selection of our fixed shower heads.

!

Содержание Sensorflow 21 A4168AA

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды