You must be eighteen (18) years of age to purchase any of our electronic
cigarette products.
Complies with relevant European standards.
Excessive gurgling or bubbling can usually be cured by cleaning the clearomiser. There are three main causes:
1.
This can occur if liquid gets into the centre airflow tube usually during filling. To clear this first remove the tank
from the battery then blow gently through the mouthpiece into a paper towel. The excess liquid will come out of
the threaded end of the device. If this happens often you may need to check that all connections are screwed
down tightly or replace the head and wick assembly with a new one for those with replaceable coils.
2.
The mouthpiece may have some condensation internally. Clean out using rolled up paper tissue or a lint free
cleaning cloth. A quick clean can be achieved by shaking sharply at the mouthpiece hole to remove the
condensation.
3.
The breathe holes may be blocked in the base. These are two small holes in either side of the base ring, ensure
these are completely clear and clean.
Draw strongly through the clearomiser to ensure it is clear before replacing.
Resistance Values
All our atomisers are fitted with a 2.5 ohm coil as standard, this is the preferred value and is suitable for the majority of
vapers. Different atomisers from other suppliers may have different resistance values. Coils for our Mini Protank model are
available with a choice of three resistance values. The lower the resistance the stronger the throat hit but this will also
reduce the life the coil meaning it would have to be replaced more often.
Typically:
Strong Vape 1.8 ohms - gives a high throat hit but shorter lifespan. It is best suited for light to moderate vapers using a
standard eGo battery (not variable) but it is prone to dry or burnt hits when used by heavy vapers.
Regular Vape 2.5 ohms - gives a medium throat hit with an average lifespan. It is best suited for heavy vapers using a
standard eGo battery or for light to moderate vapers using a variable eGo battery such as the Twist or VV at voltage
settings below 4.0 volts.
Mild Vape 3.0 ohms - gives a low throat hit but longer lifespan. It is best suited for heavy vapers using a standard eGo
battery or for light to moderate vapers using a variable eGo battery such as the Twist or VV at voltage settings above 4.2
volts.
Technical Specifications
Coil resistance: 2.5 ohms +/- 10%.
Capacity: 2.0 ml.
Warranty and Returns
As with all atomisers these are considered consumable items with an average lifespan of between 2 to 4 weeks, they
cannot be returned once they have been opened or used for health and safety reasons. However they are covered by our
"dead on arrival" warranty. In the unlikely event that you receive a faulty or incorrectly supplied item please notify us
within 48 hours to arrange an exchange.
