B78 • 01/22 • GB • p. 6 of 12 • www.armano-messtechnik.com
Operating Instructions
Digital Pressure Gauge DPG 2600
The DPG 2600 has the following menu functions:
DECIMALS
increase or decrease the number of
the indicated decimal places.
FILTER
enables the following function:
OFF/ON
activate or deactivate measured
value filtering.
FILTER RESET
resets the measured value filter.
FILTER WEIGHT
sets the weighting of the filter
between 10…100 %.
MAX-MIN RESET
resets the minimum and maximum
values.
OFFSET
tares the indication and the
currently displayed measured value.
FREEZE
freezes the indication at the current
measured value.
USE BAROMETRIC
(with optional barometric reference
only)
when
ON
, the measurement mode
changes to
Absolut
.
NOTE: The
G
shown in the display
indicates the sensor type and
not the measuring mode (when
absolute measuring mode is active,
“
g-->a
” is displayed.
LOG SAMPLE
TIME
sets the sample time of the
measured value logging.
LOG TIME
configures the time period of the
measured value logging.
LOG SLOT
software slot (CSV file).
LOG
switches logging on and off. A
flashing symbol is displayed on the
screen during logging. Up to 8 logs
in CSV format can be downloaded
via the RS-232 port (optional RS-232
data cable and software).
BAUD RATE
sets the baud rate of the serial
communication.
available values are OFF-300-600-
1200-2400-4800-9600-19200-
38400-57600-115200
SERIAL ADDR
currently not in use
(please keep set to 1).
AUTO BKL-OFF
when activated (
ON
), the display
backlight turns off after some time
to extend the battery life.
AUTO PWR-OFF
when activated (
ON
), the device
switches off automatically after
some time to extend the battery life.
Pressure units
mbar, bar, Pa, hPa, kPa, MPa, kg/cm
2
, kg/m
2
,
mmHg, cmHg, mHg, mmH
2
O, cmH
2
O, mH
2
O, torr,
atm, psi, inHg, inH
2
O, ftH
2
O
(note: Hg @ 0 °C; H
2
O @ 4 °C; 1 atm = 101325 Pa)
Battery life
When the batteries are low, a warning appears on
the display. Connect the device to the power supply.
During charging, the battery status indicator remains
at 100 %. The end of charging is reached when the
yellow charging LED goes out.
Interfaces
RS-232 interface
On the back of the DPG 2600 in the form of an M12
connector plug.
An RS-232 data cable and an RS-232 USB converter
are available upon request.
Power supply
On the back of the DPG 2600.
9 V DC – 600 mA
Polarity of the coaxial power connector:
