INSTALLATION & PAIRING
Our wireless switches include a unique pairing feature
that allows you to control multiple receivers (indoor or
outdoor) from the same transmitter.
Plug in
your receiver
Press and hold the power button on
the receiver for 5 seconds. The
LED indicator will begin to fl ash
slowly indicating pairing mode has
been activated.
On the remote control (LED
indicator still fl ashing)
press the top of the switch
(on), wait 2 seconds,
and then press the bottom of
the switch (off).
The LED indicator will
now stop fl ashing.
* This item is a Radio Frequency
device (RF), and as such the
range of the remote control is
dependent on many factors.
Actual operational distance will
vary based on walls and line of
sight obstructions, and other
nearby electronic devices.
1
2
3
