DSTREAM-XT Getting Started Guide
Document ID: 102443_1.0_00_en
Version 1.0
The DSTREAM-XT system
• Ethernet cable
(Not pictured)
• USB 3.0 cable
(Not pictured)
Related information
Connect and power up the DSTREAM-XT system
on page 26
2.3 The DSTREAM-ST unit
The DSTREAM-ST unit provides the hardware interface to connect the host computer to your
target.
Rear
The rear of the DSTREAM-ST unit contains ports for connecting to the network, host computer,
and the power source. It also contains the
RESET
button and the
USER IO
port.
Figure 2-15: Rear of the DSTREAM-ST unit
USB 3.0 port
Ethernet port
User IO port
Reset button
Power input
Ethernet port
If you want to access your DSTREAM-ST unit over a local area network, use the Ethernet
port.
The green LED indicates that the Ethernet link is up and running. The yellow LED indicates
that activity is taking place. Supported data rates are: 10/100/1000 Mbps.
DSTREAM-ST is a Gigabit Ethernet (
GbE
) device. To achieve the maximum GbE data transfer
rate:
• Your host computer must support the GbE standard.
Copyright © 2021 Arm Limited (or its affiliates). All rights reserved.
Non-Confidential
Page
16
of
38
