Setting up your System
© Copyright ARM Limited 1999. All rights reserved.
2-3
2.1.1
Setting the bus clock frequency
The ARM710T header card requires the bus clock frequency, BCLK, of the board to
be set to 4, 8, 16 or 20MHz. This is set by changing the FREQ SELECT switch, S1, on
the ARM development board, shown in Figure 2-2.
Figure 2-2 Position of switch S1
Table 2-1 shows the switch settings for the allowable bus clock frequencies.
Note
Do not select any combination other than shown in the table.
ARM development board
ARM740T
header card
1
2
FREQ
SELECT
S1
Switch settings for 20 MHz
bus clock shown.
Table 2-1 Bus clock settings
Position 4
Position 3
Position 2
Position 1
BCLK (MHz)
On
On
On
On
4
On
On
On
Off
8
On
On
Off
On
16
On
On
Off
Off
20
Содержание ARM710T
Страница 1: ...ARM DUI 0114A ARM710T Header Card KPI 0032A User Guide ...
Страница 8: ...viii Copyright ARM Limited 1999 All rights reserved ARM DUI 0114A ...
Страница 14: ...Overview of the ARM710T Header Card 1 4 Copyright ARM Limited 1999 All rights reserved ARM DUI 0114A ...
Страница 28: ...Configuring the ARM710T Header Card 3 8 Copyright ARM Limited 1999 All rights reserved ARM DUI 0114A ...
