Picture2.2-2
Picture2.2-3
75
．
00
2
Make the wall bracket as the model on
installation wall, and draw the central position
of the drill hole. (As picture 2.2-2)
、
3
Please drill four installation holes for M8
metal expand screw with the lashed electric drill
on the installation surface, and be sure with the
installation hole of 75mm depth approx imately
and M8 expand metal screw. (As picture 2.2-3 )
、
4
Get the water-proof output cable of mini
dome through the wall bracket, and make the
three screw of cover board in the mini dome into
the aperture on the base board, then turn 15 deg-
rees in clockwise, and be sure that central posit-
ion of the two ear holes of base board and cover
board are matched, and then lock it tightly using
the additional M3*5 screw.
、
Installation instruction
4
Picture2.2-5
6
Connect the power cab le, video cable and Rs485
control-cable. As the picture below.
、
5
Pls make the wall bracket aims at the M8 screw,
so that th e output cable will be locked in the hole of
motherboard bracket, and use the M8 screw to lock
the wall bracket tightly. As picture 2.2-5.
、
Picture2.2-4
PDF created with pdfFactory Pro trial version
www.pdffactory.com
