Arlotto AR1200 series, Руководство по началу работы

Страница: 35 / 48

35

Low Global Enhancement: This will enable Global dynamic range enhancement
with lower strength values

Medium Global Enhancement: This will enable Global dynamic range
enhancement with medium strength values

High Global Enhancement: This will enable Global dynamic range enhancement
with high strength values

Low Local Enhancement: This will enable Local and Global dynamic range
enhancement with lower strength values

Medium Local Enhancement: This will enable Local and Global dynamic range
enhancement with medium strength values

High Local Enhancement: This will enable Local and Global dynamic range
enhancement with high strength values
Note:

This feature (SALDRE) will work only with TI 2A algorithm, user need to ensure
that 2A engine selected in GUI is from vendor TI.

This is disabled for resolution above 720P.

All advanced features like Noise Filter, Video Stabilization and Lens Distortion
Correction algorithms will be switched OFF, if this feature is enabled.

Flicker Control: Select one of the following options of the Flicker device:

NTSC/60Hz : This will compensate for 60Hz flicker and will put the display if
selected to NTSC mode

PAL/50Hz : This will compensate for 50Hz flicker and will put the display if selected
to PAL mode

White Balance Mode: Select one of the following options:

Auto: Only this mode is supported in this version.

Day and Night: Select one of the following options:

Day

Night

Auto

Histogram: Select one of the following options for switching histogram display. This will
be enabled only on primary stream

OFF/ON button to enable/disable this option.

2A Engine: Select one of the following options to turn on/off the 2A Engine function:

ON

OFF

2A Mode: Select the required option. The options available are:

OFF: 2A is switched OFF

AE: Only Auto Exposure is switched ON

AWB: Only Auto White Balance is switched ON

AEWB: Both Auto Exposure and Auto White Balance are enabled

Low Light Behavior: Select the required option. The options available are:

Prioritize Frame rate

Prioritize Exposure

Max Exposure Time: Indoor, Outdoor, 1/8, 1/15, 1/30, 1/45