3
2
place it near a heat source.
Always unwind the cord completely
to avoid overheating.
• If the supply cord is damaged it
must be replaced by the service
agent or a similarly qualified person,
in order to avoid a hazard.
•
DO NOT insert or allow foreign
objects to enter the grille openings
as this may cause damage to the
appliance and/or user.
•
DO NOT allow children to play with
this appliance. This appliance is not
intended for use by children or infirm
persons without supervision.
•
DO NOT conduct repairs on this unit.
It has been built in accordance with
relevant safety and performance
standards. An electrical specialist
must carry out all repairs.
• This unit is intended for indoor
use only.
•
aLWaYS unplug the unit from
the mains before maintenance
or cleaning.
•
aLWaYS use the switch on the
control panel to start and stop the unit.
•
aLWaYS keep a clearance of at
least 200mm from walls furniture
and curtains
•
aLWaYS turn off and unplug the
unit when not in use.
• Use the unit in the recommended
room size of up to 20m². (assuming
standard 2.4m ceiling height)
• Do not locate the fan where furniture or
other objects can obstruct the air flow.
• Keep blinds/curtains closed during
the sunniest part of the day
• Close the fireplace damper, floor and/
or wall registers, so cool air does
not escape through the chimney
or duct work.
The fan can be assembled in three
different ways- floor standing; wall
mounted or as a table fan. remove all
the subassemblies required to assemble
the fan from the box.
FLOOr STaNDINg:
1. Attach the base to the pedestal
pole using 4 machine screws and
nut supplied in a separate poly bag.
(Figure 1).
2. unscrew the height adjustment
IDentIFICatIOn
aSSembly
enerGy SaVInG tIPS
1. Pedestal pole
2. Base
3. Pedestal pole screw cap
4. Pedestal pole fixing screws
5. Support pole
6. Speed control box
7. Height adjustment fastening knob
8. Front grille
9. Fan blade
10. Rear grille
11. Carry handle
12. Motor housing
13. Oscillation switch
14. Table fan stand
15. Wall mounting hook
SaFety InStrUCtIOnS
1
Figure 1
2
4
3
14
13
12
7
6
5
8
10
9
11
15
CPIN002509/2