Arlec AEC007 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 8

Arlec AEC007 Скачать руководство пользователя страница 5

5

Sleep Mode:-

Press the Mode button until the LED corresponding to the Sleep mode glows on the display panel.

Under this mode the fan speed switches ON and OFF at set speeds thus saving energy during the

night.
If to start the fan speed is set to High the fan will operate for half an hour in each fan speed setting

The cycle will continue until the preset time is reached or the unit is turned off.
If the fan speed is set to Medium the unit will operate for 0.5hr in Medium and then switch to Low

setting and will operate for 0.5hr. After 0.5hr the unit will switch back to medium and the cycle

continues unit the preset time is reached or the unit is turned off.
If the fan is set to Low speed setting the fan will continue to operate in low setting until the preset

time is reached or the unit is turned off.

Anion Generator Button

Press this button to and the built is negative ion generator will start to release negative ions.

When this function is used the corresponding LED indicator will be on. Under this mode negative

Ions are blown throughout the room by the fan to neutralize the positive charge in the particles

of smoke and dust that float in the air, thereby losing their energy & will no longer remain in the

air. The combination of negative ions on bacteria may deter the bacteria growth or even kill the

bacteria.
Negative ions are effective in creating a cleaner and more sterile environment leading to a

healthier lifestyle.

Remote Control

The remote controller requires 1x CR2032 3V Lithium battery (Button cell).
To install the batteries remove the battery covers as per the marking shown on the battery cover.

Insert the battery with the + marking on the battery facing up.

Put the battery cover back before use.
The remote controller has all the same functions as the buttons on the control panel of the air

cooler.
To use the remote control make sure that the air cooler unit is plugged into the mains supply, then

point the remote to the sensor located at the display panel and press the desired button.
The remote control operating range is 6 metres.

Make sure there is no obstacle between the remote and the sensor.

AEC007 Instructions.indd 5

2/08/11 10:25 AM

«
...
3
4
5
6
7
...
»

Содержание AEC007









Отзывы:

Нет отзывов