4
OPERATION:-
Make sure your read all the safety warning before you operate this unit for the first time.
ON / Speed Button:-
Plug the unit to a standard mains socket and turn on the mains switch. Press the ON/ Speed
button to start the unit. The unit will beep twice and will be in a stand-by status, all buttons will
be in active unless you press the ON/Speed Button. Each time the unit is turned on it will be in
Normal Mode of operation with the wind speed setting on medium. The wind speed setting will
stay on medium speed for 3 Sec and will switch back to low (Lo) speed setting automatically
unless changed to a different setting.
Press the button repeatedly to change the fan speed – Low, Medium and High and the
corresponding speed indicator LED will glow on the display panel
Off Button
To turn the unit off press this button once and the unit will be turned off.
Swing Button
Press this button and the unit will swing sideways and swing indicator LED will glow on the
indicator. Press this button again and the unit will stop oscillating.
Timer Button
Set the Timer to a desired operating time (0.5 Hour to 7.5 Hours) by pressing the Timer button
repeatedly. Each time the button is pressed the time interval is incremented by 0.5hrs and the
corresponding time setting will be displayed on the seven segment display.
0.5h
→
1h
→
1.5h
→
2h……
→
7.5h
→
0
→
back to 0.5h
When the set time has been reached the unit will shut off automatically and will stay in a standby
mode.
Cool / Humidifier Button
Press this button and the unit will beep once and will start its cooler and humidifier function and
the corresponding indicator LED will glow on the display panel.
This function is recommended for higher/ efficient cooling effect under any mode.
Warning:
Please do not use Cooler / Humidifier function when there is no water in water tank
this may result in a noisy operation and will damage the motor permanently.
Mode Button
Change the mode to the desired type (Normal, Natural and Sleep) by pressing the Mode button
repeatedly.
Normal Mode:-
When the unit is turned ON it will stay in Normal mode and the corresponding LED will glow on the
display panel. Under this mode the fan speed remains constant at set speed (Low / Medium/ High).
This mode is recommended for normal operation
Natural Mode:-
Press the Mode button until the LED corresponding to the natural mode glows on the display
panel. Under this mode the fan speed varies randomly (Low/Medium/High and off) giving the
effect of natural breeze.
It is recommended to set the fan speed to high under this mode for a better result.
AEC007 Instructions.indd 4
2/08/11 10:25 AM