7
EN
6. OPERATION
Storing food
To get the best results from your appliance, follow these instructions:
• Only store foodstuffs in the appliance when it has reached the correct operating temperature.
• Ensure GN container bays are full at all times, even if the GN containers are unused or empty. Empty bays
will greatly reduce efficiency of the appliance.
• Always close the door, lid or drawer when not in use.
• Do not place uncovered hot food or liquid inside the appliance.
• Wrap or cover food where possible.
• Do not obstruct the fan inside the appliance.
• Avoid opening the doors for prolonged periods of time.
• The food must be put into container before placed into cabinet or on the shelf. Food must not be placed into
food cabinet directly.
Turn on
• Close the door of the appliance.
• Ensure the power switch is set to [O] then connect
to the power outlet.
• Switch on the Power [I]. The current temperature
within the appliance is displayed.
• The on the control panel will flash to indicate a
delay to compressor start.
Open/ Close the lid or drawer
The lid of the Sliding Top Saladette is multi positional
• With the lid closed, slide the panel back into the
half open position. This allows partial access to the
GN container trays.
• Lift the lid up and back so the hinge settles into
the support slot.
• Lift the lid up and completely back so the GN con-
tainer trays are completely exposed.
WARNING: The sliding lid does not have a locking mechanism. Always make sure that the lid is in the ‘half-
open’ position before opening. WARNING: Do not pull the drawer out of its full open position to avoid any hurt.
Temperature Setting and Control
The front panel of the thermostat display:
1. Defrost indicator
2. Compressor operation indicator
3. SET key
4. Temperature modification keys
5. Defrost button
How to see the set point
• Push and immediately release the SET key, the set point will be showed;
• Push and immediately release the SET key or wait about 15s to return to normal visualisation.
