ARKSEN 002-AU-30035/GAS35 Скачать руководство пользователя страница 3

owner’s manual

3

IMPORTANT SAFETY INSTRUCTION

READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING

When using this product, basic precautions should always be followed, including the following;
• 

This product is not intended for use by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given 
supervision or instruction concerning using the product by a person responsible of their safety.

• 

Do not use this product other than intended use.

• 

Wear proper protection equipment when installing or using this product.

• 

Ensure all fittings and threaded connections are tightened and leak free before operating.

DANGER!

Gasoline and other fuels are extremely flammable. Keep away from heat sparks, and open flame.

• 

Do not use electronics or mobile communications devices such as mobile phones when pumping 

flammable liquids.

• 

Attach ground wire and bond containers that are being pump from and into. Ground all containers 

to a known ground source to dissipate static electricity before pumping liquids.

• 

Gasoline vapors can expode. Harmful or fatal if swallowed. Avoid breath in fuel vapors.

• 

Do not smoke near or while using the gas caddy.

• 

This product is intended for fuel transfer only and is not intended to be used to transport fuel in 

any vehicle or trailer.

• 

Do not modify this product.

WARNING! CAUTION! ATTENTION!

• 

Do not use this product for proplonged fuel storage.

• 

Use caddy for one type of fuel only to avoid possible damage.

• 

Monitor flow rate and fill level to prevent overflows and spills.

• 

Always empty the pump and hose after using the caddy. Lift the hose and turn the handle to the 

opposite direction to empty all remaining liquid back into the caddy.

• 

Caution when filling the cadde through the fill tube. Monitor closely to prevent overflows or spills.

Содержание 002-AU-30035/GAS35













Отзывы: