Arkray SE-1520, Руководство по эксплуатации

Страница: 65 / 91

Range or Selection
Coefficient of
correlation correction
Normal value range
Correction
temperature
SE-1520 ■ 3-15
Initialize parameters 2.
Press [hyphen (−)] key to select
measurement item to initialize.
Press [ENTER] key.
The Confirmation screen is
displayed.
Select [START] key or [STOP]
key.
When performing initialization→
If [START] key is pressed, the
parameters are initialized and
t h e S e l e c t I t e m s c r e e n i s
restored.
When not performing initialization→
When [STOP] key is pressed,
the Initialization is canceled
and the Select Item screen is
restored.
●
●
●
End Initialization 3.
W h e n t h e i n i t i a l i z a t i o n i s
finished, press [STOP] key to
return to the MAIN MENU.
●
3-3
パラメータメニュー
Chapter 3 Sub Menu
The following table shows the conditions of the factory
setting.
Refer to this table to set each condition.
Present parameter
settings can be checked, if
it is necessary see 3-3-1
Printing Parameters" for
details.
▲
■Factory set parameter values
Besides [hyphen (−)] key
c a n b e u s e d t o s e l e c t
items, [0], [2], [4], [6], and
[8] keys can be used to
select item.
[0]→Item displayed first
[2]→Last item
[4]→Item before the
current item
[6]→Next item of the
current item
[8]→The first item
▲
Factory setting
a：1.0
b：0.0
Measurement
range
「−−−−」
［ N o . 0 3：C l ］
（ 3／1 1 ）
W r i t i n g …
I n i t i a l i z e ?
Y e s （ S T A R T ） N o（ S T O P ）
１ . M e a s u r e ２ . S u b m e n u
３ . C a l .
（ １／１ ）
a：0〜10000
b：−10000〜10000
L：0〜10000
H：0〜10000
「25℃」「30℃」
「−−−−」 （No correction）