Arkon MAGE1, Руководство пользователя

Страница: 21 / 39

MAGE1 User Guide 20 V1.5 12-1-2022
9.12. Info
Modbus
register Modbus
address No. of
bytes
Data type
No. of
decimal Min
Value
Max Value Description
Read/
Write
1000 999 4 Longint 0 - - Time R
1002 1001 4 Longint 0 - - Date R
1004 1003 4 Longint 0 - - Unit No. R
1006 1005 4 Longint 0 - - Error (min) R
1008 1007 4 Longint 0 - - OK (min) R
1010 1009 4 Longint 0 - - Diameter R
1012 1011 4 Longint 2 - -
FirmWare
No.
R
1014 1013 4 Longint 3 - - Flow Qn R
1016 1015 4 Longint 0 - -
Excitation
counter
R
Time - time is stored in BCD format HHMMSS (ie 08:33:15 = 0x00083315)
Date - date is stored in BCD format YYYYMMDD (ie 25.03.2010 = 0x20100325)
Unit no.
– exclusive number for this Flowmeter. If there are any problems, please refer to this number
Error
(min)
– the number of minutes the device was not measuring because of errors
OK (min) - the number of minutes that the device measured correctly
Diameter
– this item shows the nominal sensor diameter that is currently configured for the given flowmeter
Firmware No .
– this shows the current firmware version
Flow Qn
– Nominal flow. Real value = Actual value / 1000
Excitation Counter
– the number of excitations
9.13. Display
Modbus
register Modbus
address No. of
bytes Data
type No. of
decimal Min.
Value Max.
Value
Default Description
Read/
Write
1500 1499 4 Longint - 0 4 2
Unit Flow (+/-
), 0=UKG/min,
1=USG/min,
2=m3/h,
3=l/min,
4=l/s
R/W
1502 1501 4 Longint - 0 3 2
Unit Volume,
0=UKG,
1=USG,
2=m3,
3=l
R/W
1504 1503 4 Longint 0 0 100 50 Contrast [%] R/W
Unit Flow
– actual flow unit (default m
3 /h)
Unit Volume
– totalizer unit (default m
3
)
Contrast
– Set display’s contrast