7
9
10
6
8
To attach
optional
camera/pico projector adapter, unscrew shaft knob and
remove phone holder, ring, and ball adapter. Attach the 25mm ball end of the
camera adapter to the shaft and tighten clockwise to secure.
Unscrew mount’s knob to loosen grip. Place mount around pole and
tighten knob to secure.
Attach short, medium or long support legs to the tablet holder based
on the size of your device.
Push down on lower legs of spring-loaded holder to insert tablet.
For instructions on how to assemble tablet holder, refer to included
TAB001 manual. Attach tablet holder by inserting the mount’s Dual
T-Tabs into the holder’s Dual T-Slots.
Adjust the height of the pole by loosening the adjustment collar
counterclockwise. Tighten clockwise to set height.
Consumer Hotline:
USA
(800) 841-0884
INT’L
(626) 254-9005
Monday - Friday 9 am - 5 pm, PST
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in Taiwan and USA
© Copyright 2018 Arkon Resources, Inc.
!
page 2
Tightening
Knob
OPTIONAL
rev.092418
CLAMPRCB
| Remarkable Creators Video Phone and Tablet Clamp with Ring Light
Safety Precautions
Arkon Resources, Inc. is not responsible for any damages caused to your
device or yourself due to the installation or use of this mount.