ARKO welding 22300100AF, Технические инструкции

Страница: 7 / 22

ARKO FLUX 100. Instructions Manual 7
1. GENERAL DESCRIPTION. TECHNICAL CHARACTERISTICS.
The ARKO FLUX line of equipment allows FCAW welding, which is a continuous flux-cored arc welding
process using filler metal. This process is used with the protection of a flux contained within the flux-cored wire,
no shielding gas is required.
It is faster and easier to operate than the electrode process. It is suitable for
welding carbon steel, which is the most widely used metal in modern industry.
Technical characteristics of the Arko series equipment.
TECHNICAL CHARACTERISTICS.
Ref. 22300100AF
FLUX 100
Power supply voltage U
1
(50/60 Hz) (1PH) 230V ±15%
Maximum primary intensity (I
1max
) 13.4 A
Primary effective intensity (I
1eff
) 6 A
Continuous adjustment margin I
2min
- I
2max
20-100 A
Maximum welding intensity I
2max
. 90 A / 20%
Rated welding intensity (100%) 45 A
Welding voltage U
2min
- U
2max
. 16.3-19 V
Applicable wire diameters. 0.9 mm(FLUX-CORED)
Thermal insulation. F (155º C)
Mechanical protection index (IP class) IP21S
Ventilation. FORCED
Total dimensions ( L x A x H ) mm. 318 x 135 x 240
Weight. 5.4 Kg
FOR USE OF ANY OTHER ACCESSORY CHECK WITH THE MANUFACTURER.
2. TRANSPORT AND INSTALLATION.
2.1. TRANSPORT
Knocks and sudden movements must be avoided when transporting the equipment. In any case, the packaging must
be protected from water.
HANDLE THE EQUIPMENT CAREFULLY, IT WILL LAST LONGER !
2.2. INSTALLATION.
The location must fulfil the following conditions:
-
Place: Dry and ventilated. Far enough away from the welding area in order to prevent the dust caused by the
welding process from getting into the equipment. Never work in the rain.
Installation of carrying strap: