Arkbird 421000001, Руководство пользователя

Страница: 9 / 19

-9-
5. GPS & Save Home Position
After power on, Arkbird will start to search GPS satellite and save the first valid position as
Home.
During searching, the elevator will be up and any manipulation of radio stick is invalid . If
need to skip the searching, please push CH6 more than 75% and push CH1 to left or right side for
1 second.
Once skipped the searching, it CANNOT switch to RTH mode, RTH logo will flash but
it is balance mode.
6. Flight OSD Inte rface
1. When Arkbird is auto piloting the plane (RTH mode
、
Cruise flight), t he lower right will
display Roll, Pitch control Angle Value and Throttle Value , Adjust Autopilot if these angles not
appropriate.
2. The idle current is 0.8A while turning off the throttle, if the readout is wrong, please enter
the OSD menu and exit to reset the current value.
3. Please reduce the motor vibration to keep the “vibration value” more than 65 (100 is the
most ideal situation).
4. Pay attention to GPS satellite quantity, less than 7 will result mistake positioning.