Arkbird 421000001, Руководство пользователя

Страница: 13 / 19

-13-
Main Menu:
"Set HOME" --------- Save home position
"Set CTL Parameters" --------- Set CTL Parameters
"Set RTH Parameters" --------- Set RTH (Return to Home) Parameters
"Set OSD Parameters" --------- Set OSD Interface
"------------------------------------------------------------------------------------------------------------ "
"Flight Parameters" --------- Reverse and delta-wing mixing
"Fence Area Set" --------- Set Fence Mode Area
"Way Point Set1" --------- Set Way Point Mode1
"Way Point Set2" --------- Set Way Point Mode2
"Reset All to Default" --------- Move stick to right side for 2 seconds to reset to default
Set CTL Parameters
"Roll Ctl " ---------Roll Control
（
%
） （
equivalent to travel range on radio, Please
adjust the travel range on OSD, do not adjust through radio
）
"Pitch Ctl " ---------Pitch Control
（
%
）
"Yaw Ctl " --------Yaw Control
（
%
）
"------------------------------------------------------------------------------------------------------------ "
"Neutral Check" ---------Neutral Point Check:
Neutral point alignment needed under first installation, not used
for weeks, or temperature variation is more than 10 degrees.
Aileron all the way to the right means it is waiting autopilot be put
down, OSD shows “Waiting Neutral Point Check.”
Put the autopilot paralleled to the ground (Please prop up if there is
a landing gear), and move CH1 left and right to do 3-seconds neutral
point check. Aileron will be back to center once finished.
Note: Pushing CH5 and CH6 to minus (0%) and moving CH1 stick
to left or right side within 3 seconds after power on can also enter
neutral point check.
"------------------------------------------------------------------------------------------------------------ "
" Custom Mode" ---------Custom Mode
（
CH5> 50% and 30% < CH6 < 70%
）
:
"RT H": Return to Home
（
Default
）
"Way Point": Way Point Mode, it is able to trace the Way Point
Set by WayPoint menu.
"HOVER":Hover mode, regard the hover position as balance
position
"Gyro":Gyro Mode, it will do compensation for unintentional
attitude changes.
"Attitude Source" ---------Attitude Source:
"GPS":Attitude acquisition through GPS
"AR PRESS":Attitude acquis ition through
barometer(recommend)