Tips on the correct set-up and handling of the reef ceramics:
Carefully
place the reef ceramics into your aquarium and make sure that you do
not touch
the panes
to avoid scratching them.
Place the reef ceramics directly on the bottom pane or the substrate and do
not use any
underlay
such as styrofoam or acrylic glass to
prevent the release of pollutants and
detritus deposits.
To
securely connect reef ceramics to each other
or with other reef structures, we recom-
mend using our
MICROBE-LIFT Reefscaper
reef cement and
for later set ups
under water
our
MICROBE-LIFT Coralscraper Epoxy.
This is particularly recommended for higher structures and it also allows you to customise
your reef.
If you want to work on your reef ceramics later, we recommend the following tools:
·
Small
angle grinder
with stone leaf
·
Edge tongs
·
Hammer
in combination with a
chisel
or flat
screwdriver
