MAINTENANCE
20
0
0
1
.0
8
8
7
5
r
e
v
.
1
0
13. Unscrew the 3 motor bolts and pull it out
from the frame. When you pull out the motor,
make sure the shaft stay assembled with the
motor. The bearing does not need to stay
with the shaft.
14. Uncouple the spring (1) that holds the CBLM
plate (2) and unclip the SSRS bloc (3) from
the CBLM plate (2). To unclip it, while
holding the CBLM plate, push the block out.
15. Replace the SSRS block and clip the new
block in the slot of the CBLM plate. To clip
the block, make sure to push the plate in the
bottom of the SSRS block slot.
16. Put the bearing, shaft and motor in place.
The bearing has to be placed between the
brass bushing and the shaft with the writing
on the bearing against the frame.
17. Reinstall the drum. Hold the washer and
spring to the drum with a screwdriver or
home knife and insert the drum in the frame.
You may have to push on the "Quick
Release" button.
