1
Roll the patient onto their side. Fold the sling
in half and place it on the bed along the back
of the patient.
2
Roll the patient back onto the sling and then roll the
patient in the opposite direction, so that the folded
part of the sling can be straightened out.
5
Raise patient.
6
Move the patient.
Place attachment loop on the
hook.
Make sure that the safety latch
is closed.
3
Loop sling
4
Place spreader bar in flat position.
and close enough to attach the loops.
Connect the sling shoulder and leg loops to the
spreader bar.
7
Lower until no tension. Detach
the leg loops, then shoulder
loops.
001-31310-EN Rev 0 • 05/2020 • Page 2/4
Transfer from supine to seated position
