The sensor head must remain
untouched during this time
After approximately 4 seconds the
Install Sensor Screen
will display
1
Remove the Provizio SEM Scanner single-use sensor
from its packaging and place onto the sensor head.
You will hear a click when the sensor is placed
correctly
Each patient scanning session requires a new sensor
2
3
Press the
Next Screen Button
to continue, the
scanner will test the installation of the sensor
and then display the Mode of Operation Screen
0
3
1
4
2
5
6
7
4 PROVIZIO SEM SCANNER • PRODUCT TRAINING
Start-up
By removing from the
Charging Hub
or
By pressing the
Action Button
until the screen illuminates and
the Splash Screen displays
Turn on Provizio SEM Scanner
Installing the Sensor
