7
Preparations
Actions Before the First Use (9 Steps)
1 Visually inspect the
Battery Charger
for transport
damage.
2 The package should be recycled according to
local regulations.
3 Read the
IFU
.
4 Unpack the
Battery Charger.
5 Select the plug according to the country it will be
used in and discard the other plugs.
6 Charge the battery until the indicator LED turns
green.
7 Prepare an area that is dry, with good ventilation
and out of direct sunlight for storage of the
Battery Charger
.
8 Choose a designated area where the
IFU
should
be kept, accessible at all times.
9 Make sure to have a rescue plan ready in case of a
patient emergency.
Actions Before Every Use (2 Steps)
1 Carry out a thorough inspection for damage.
2 If any part is missing or damaged – Do NOT use
the product!
NOTE
If you have any questions, please contact your
local Arjo representative for support and
service. The contact information is listed at the
end of this IFU.
Installation of Charger
Installation
• Keep the
Battery Charger
away from main access
areas.
• The
Battery Charger
is designed for dry
surroundings and may not be installed in
bathrooms or any other wet areas (IP2X).
• Mount the battery holder to a suitable wall with
two screws.
(See Fig. 1)
For screw specifications,
see
Technical Specifications on page 11
.
• Check label on battery and charger
• Plug in the
Battery Charger
to a standard power
(AC) outlet.
• The
Battery Charger
is not allowed to be used in
a patient environment.
Fig. 1
