Arjo KWIKtrak 4-Post, Инструкция по сборке

Страница: 6 / 28

6
The equipment must be used in accordance
with the following safety instructions.
Anyone using the equipment must also
have read and understood the instructions
in this manual. If there is anything you are
not sure about, contact your local Arjo
representative.
Safety Instructions and
Warnings
• The Semi-Permanent Rack system
installation must be performed by two
persons.
• All track ends must have a KWIKtrak
autolock stopper in place and secured.
• The Semi-Permanent Rack system is
designed to be used with all KWIKtrak
lifts with a maximum safe working load
of 600 lb.
• Make sure all components are present
(see table on page 8) .
• Follow the assembly procedure
sequence.
• Use each and every one of the parts –
DO NOT leave any out.
• This equipment must be used by a
caregiver with proper training to work
with the patient to be transferred.
• When performing a transfer, do not
allow the patient to swing on the rack.
WARNING: The maximum track length
for this system is determined by the lift
in use, as well as the track size.
See Fig. 1 for details.
Maximum Mobile Track Span VS
Lift Capacity & Track Style
Track
Lift
Capacity
90 mm 140 mm 180 mm
200 kg
(440 lb)
3 m
(9 ft 10
in)
4.5 m
(14 ft 9
in)
6 m
(19 ft 8
in)
272 kg
(600 lb)
3.5 m
(11 ft 6
in)
4.5 m
(14 ft 9
in)
Fig. 1
WARNING: Firmly tighten all fasteners.
Periodically inspect and retighten
fasteners to a torque of 20 N
•
m (15 lbf
•
ft)
as required.
Safety Instructions