16
Microbiological Formation Prevention
,QRUGHUWRHQKDQFHWKHRQVLWHFXUDWLYHDFWLRQVFKORULQHRU
WKHUPDOVKRFNZKLFKGRQRWJXDUDQWHHDUHGXFWLRQRIWKH
FRQWDPLQDWLRQORQJWHUPPDNHVXUHWRIROORZWKHLQVWUXFWLRQV
EHORZ
'RQRWIRUJHWWRFRQWDFW$UMRIRUWKHDQQXDO&DUHDQG3UHYHQWLYH
0DLQWHQDQFHYLVLW
Installation precautions
In order to limit the growth of bacterial flora, it is
necessary to take action at four levels:
• Avoid stagnating water and ensure proper water
circulation;
• Take precautions against the formation of scale and
corrosion based on to the water quality;
• Maintain a high water temperature from production to
the different distribution circuits;
• Mix hot and cold water as close as possible to the
point of use.
Use
• Make sure that the water circulates in the shower on a
daily basis even if the shower is not used; and
particular to make sure to remove any water that may
be left behind in the hose.
• Let the water flow approximately 5 minutes before the
first shower of the day.
• Clean and disinfect according to the IFU before the
first shower of the day and after the shower of each
patient.