Arizer XQ2, Руководство пользователя

Страница: 13 / 17

Whip System
1. Set the Unit to a higher temperature to suit your preference for light or thick
vapor 170C-220C (338F-428F).
2. Coarsely grind the desired amount of material and load it into the top of the
Connoisseur Bowl.
&
Do not load or pack the bowl too tightly or airflow could be restricted.
3. Attach the Glass Connoisseur Bowl to the unit, then attach the 3' Whip to the
bowl. Wait for approximately 3-5 minutes to prime the materials for use.
4. Inhale through the glass mouthpiece in a slow, steady draw.
5. Alternately, turn on the Fan while inhaling for an assisted draw.
6. Periodically stirring the bowl contents will help get the most out of your
material. Use the provided Stirring Tool to stir the material in the chamber.
Remove the bowl from the unit before stirring.
7. Discard used bowl contents and refill as desired.
0 The Dome Screen in the 3' Whip can clog and needs to be cleaned or replaced
periodically for optimal performance.
Balloon System
1. Set the Unit to a higher temperature to suit your preference for light or thick
vapor 170C-220C (338F-428F).
2. Coarsely grind the desired amount of material and load it into the top of the
Connoisseur Bowl.
&
Do not load/pack the bowl too tightly or airflow could be restricted.
Always load from the top of the Bowl and never load both bowl chambers atthe
same
time.
3. Attach the loaded Glass Connoisseur Bowl to the unit, then attach the mini­
whip to the bowl. Wait for approximately 3-5 minutes to prime the materials for
use.
4. Attach the balloon mouthpiece to the mini-whip
5. Activate the Fan to your preferred speed and allow the balloon to fill with vapor.
6. Detach the balloon from the mini-whip, then inhale through the Frosted Glass
Balloon Mouthpiece. Seal the balloon between draws using the silicone Balloon
Cap to prevent leakage.
18
Whip System
Balloon System
www.canatura.com/en