Aritech CyberDome, Инструкция по программированию

Страница: 31 / 40

CyberDome Programming Instructions 29
PRESET TITLES
-- SITE 000 --
ENTER PRESET NUMBER : - -
(00-15)
(ALARM) – HLP (SEQ) - NEXT
3. Enter the preset number (00-15) of the title to be edited. The following menu will be
displayed for 2 seconds:
Figure 38: Second Preset Titles Menu
PRESET TITLES
-- SITE 000 --
USE JOYSTICK TO ENTER
PRESET TITLE AND ITS
POSITION
(ALARM) – HLP (SEQ) - NEXT
4. Next, the Title Entry Menu will be displayed. While the cursor (arrow) is in the far left
position (under the left caret), use the
keys (or the joystick) to move the
position of the title up and down on the screen.
Figure 39: Title Entry Menu
00 < >
(ALARM) – HLP (SEQ) - NEXT
5. Next, move the cursor to the right (inside the carets). Edit the title by moving the
keys (or the joystick) to scroll to the desired alphanumeric character. Once the title
is set, press
seq
to return to the Preset Titles Menu, and press again to return to the
Edit Titles menu.
Area Titles (Steps 6-11):
6. The CyberDome can be programmed to display a title over a selected area of its pan/tilt
routine. Press
2
from the Edit Titles Menu to assign and edit area titles.
Figure 40: Area Titles Menu
While the cursor is between the
carets, use the UP/DOWN
arrows to scroll through the
alphanumeric characters
While the cursor is
under the left caret,
use the UP/DOWN
arrows to position the
title