Page 8
User Manual for CD3403
The alarm is now set.
System Armed
The current date and time automatically appears.
TUE 23 APR 07.40
A
RMING A SYSTEM WITH OPEN ZONES
When arming (switching on) the system, you may get the message
‘Open Zone(s)’
along with a list of the
zones in the premises that have not yet been closed. You should close these zones and then retry arming
the system. However, occasionally you may not be able to close an open zone because, for example, a door
lock or magnetic contact may be malfunctioning. You can exclude this open zone from the system (called
inhibiting a zone).
Only use this exclusion option when absolutely necessary as any inhibiting of zones will reduce the security
level of your system. When the system is disarmed, the message ‘
Events in Log...
’ is displayed and the the
zones inhibited will be listed.
Although you can exclude an open zone when the tamper alarm has been triggered (identified by the letter
‘T’ in front of the open zone listed), you will not be able to arm the system until the tamper alarm has been
rectified.
1.
Go to the keypad. The current date and time appear on
the display. An example is shown.
TUE 23 APR 08.21
2.
Press the key
0
and then enter your code. A ‘*’ appears
in the display for every key you press. Use the
0
key to
cancel an incorrect entry and to restart a new entry.
Enter Code
0 + code
Enter Code ****
Arm Menu
3. Press
the
Accept
key.
Normal Set
4. Press
the
Accept
key again.
Normal Set
The system begins to arm. If it discovers any zones in the
premises that are not properly closed, they will be listed.
Open Zone(s)
In this example, zone 2 ‘Hall’ is open.
02 Hall
5. Press
to exclude a zone from the system. One of two
messages will then appear. Either the system will tell you
that there are no zones already inhibited, or it will show
the message ‘
Zones Inhibited
’
and then list the inhibited
zone(s).
You can then enter the zone numberv you want to inhibit.
Inhibit Zone ___
6.
Press the number of the open zone, in this example ‘2.’
2
