Aritech ACL870SU-BSMF, Инструкция по установке

Страница: 4 / 6

4 / 6 P/N 1073503-EN
• REV B • ISS 04JUL22
Add Finger Relay 2 (Finger that will activate relay 2)
1. Swipe Admin Finger 2 times.
Indication: Green slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Short beep.
3. Swipe User Finger min. 6 times (until short + long beep),
— or —
Present card/tag 1 time.
Indication: Orange fast blinking, 1 short + 1 long beep.
Relay 2 is available if the reader is used with remote relay unit
with 2 relays (ACL870FL-PB and ACL800FL-RU2). Consult the
installer if Relay 2 is available in your system.
Add Finger Relay 1 and 2 (Finger that will activate relays 1
and 2)
1. Swipe Admin Finger 3 times.
Indication: Green slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Short beep.
3. Swipe User Finger min. 6 times (until short + long beep),
— or —
Present card/tag 1 time.
Indication: Orange fast blinking, 1 short + 1 long beep.
Relay 2 is available if the reader is used with remote relay unit
with 2 relays (ACL870FL-PB and ACL800FL-RU2). Consult the
installer if Relay 2 is available in your system.
Delete Finger
1. Swipe Admin Finger 4 times.
Indication: Red slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Short beep.
3. Swipe User Finger,
— or —
Present card/tag 1 time.
Indication: Red fast blinking, 1 short + 1 long beep.
Delete All Fingers and cards
1. Swipe Admin Finger 4 times.
Indication: Red slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Red slow blinking, short beep.
3. Swipe Admin Finger 2 times.
Indication: Red fast blinking, multiple beeps.
Change Admin Finger
1. Swipe Admin Finger 5 times.
Indication: Orange slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Orange slow blinking, short beep.
3. Swipe New Admin Finger min. 6 times.
Indication: Orange fast blinking, 1 short + 1 long beeps.
Change Installer Finger
1. Swipe Admin Finger 6 times.
Indication: Green slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Green slow blinking, 1 short + 1 long beeps.
3. Swipe New Installer Finger min. 6 times.
Indication: Orange fast blinking, 1 short + 1 long beeps.
Installer Programming
Set Relay 1 Time
1. Swipe Installer Finger 1 time.
Indication: Red slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Short beep.
3. Swipe the Installer Finger and start counting seconds.
Indication: Red fast blinking, beeps on 1 second.
4. Swipe the Installer Finger to stop or wait 30 seconds to put
the relay in toggle mode.
Indication: Red fast blinking, 1 short and 1 long beep.
Set Relay 2 Time
1. Swipe Installer Finger 2 times.
Indication: Green slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Short beep.
3. Swipe the Installer Finger and start counting seconds
Indication: Green fast blinking, beeps on 1 second.
4. Swipe the Installer Finger to stop or wait 30 seconds to put
the relay in toggle mode.
Indication: Green fast blinking, 1 short and 1 long beep.
Buzzer ON/OFF
1. Swipe Installer Finger 3 times.
Indication: Orange slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Short beep.
3. Swipe the Installer Finger.
Indication: Orange fast blinking, 1 short and 1 long beep.
Backlight ON/OFF
1. Swipe Installer Finger 4 times.
Indication: Red slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Short beep.
3. Swipe the Installer Finger.
Indication: Red fast blinking, 1 short and 1 long beep.
Specifications
Fingerprint capacity 97 templates
Prox. cards capacity 2000 cards
Power supply 9 to 14 V DC
Current consumption 150 mA max.
Card type 13,56 MHz
Mifare Classic 1K & 4K
Mifare Ultralight 1K & 4K
DesFire EV1 2K, 4K & 8K
Output 1 x Relay (2 A at 24 V AC/DC)