Aritech ACL870SU-BSMF, Инструкция по установке

Страница: 3 / 6

P/N 1073503-
EN • REV B • ISS 04JUL22
3 / 6
6. Swipe the Master finger min. 6 times (until OK beep).
Cautions
• This procedure also deletes all the users, the installer’s
finger, installer’s PIN code and admin’s PIN code.
•
This procedure will unpair the connected relay unit
(ACL870SU-PB, ACL870FL-PB or ACL800FL-RU2)
Pairing - biometric reader and remote relay
unit
If secure installation is needed, the reader can be connected to
remote relay unit at secured area, which also can play the role
of request-to-exit push button. Follow the instructions bellow to
pair (couple) both devices or refer to the Remote Relay’s
Manual.
Pairing ACL870SU-BSMF with ACL870FL-
PB
Figure 6: Wiring
1. Close the jumper. ACL870FL-PB beeps continuously and
the red led blinks.
2. Open the jumper.
3. Wait for beep + OK beep (short + short + long beep).
After the OK beep, the coupling is done.
Pairing ACL870SU-BSMF with
ACL870SUPB
Figure 7: Wiring
1. Put dipswitch No.1 to position ON. ACL870SU-PB beeps
continuously and the red led blinks.
2. Put DIP switch 1 to position OFF.
3. Wait for beep + OK beep (short + short + long beep)
After the OK beep, the coupling is done.
Pairing ACL870SU-BSMF with
ACL800FLRU2
Figure 8: Wiring
1. 1. Put the jumper to closed position. ACL800FL-RU2
beeps continuously and the red led blinks.
2. 2. Put the jumper to open position.
3. 3. Wait for beep + OK beep (short + short + long beep).
After the OK beep, the coupling is done.
Caution: Changing the admin finger will also unpair the remote
relay unit.
Administrator programming
Use point fingers as Administrator and Installer. You can use
the other fingers as access fingers. Administrator finger is
enrolled at the end of the system installation. Initial enrollment
of the Admin finger is described in installer manual.
Add Finger Relay 1 (Finger that will activate relay 1)
1. Swipe Admin Finger 1 time.
Indication: Green slow blinking, short beep.
2. Wait 5 seconds (until fast blinking).
Indication: Short beep.
3. Swipe User Finger min. 6 times (until short + long beep),
— or —
Present card/tag 1 time.
Indication: Orange fast blinking, 1 short + 1 long beep.
Black
Red
Pink
Violet
GND
+12V
B (RS485)
A (RS485)
E
xi
t b
ut
to
n
(N
O
)
Black
Red
Pink
Violet
Black
Brown
Pink
Violet
Red
Yellow
max. 50 meters
White
ACL870SU-BSMF
Pink
A (RS485)
B (RS485)
Violet
max. 50 m
GND +12V GND +12V
ACL800FL-RU2
RIG HT LEFT
A
D
M
IN
IN
S
T
A
L
L
E
R