Aritech ACL800FL-CONV-W RS485, Инструкция по установке, Страница: 1 / 4

© 2022 Carrier
1 / 4 P/N 1073494-
EN • REV B • ISS 07JUL22
ACL800FL-CONV-W RS485 to TCP/IP
Converter Installation Sheet
Description
The ACL800FL-CONV-W is highly integrated serial to ethernet
converter that enables you to connect any UTC biometric
reader over a local LAN network or over the Internet to your
computer. Configuration of the IP address, dynamic DNS,
TCP/UDP ports can be done from browser or from the ACL800
BioManager software. The software is capable to automatically
search IP addresses of the converters, as well as the serial
numbers of the biometric readers.
The device is already preset for use with the biometric readers.
Wiring
Figure 1: PCB
Figure 2: Connections
Figure 3: Power supply connection
Changing the IP address
The default IP of the converter is: 192.168.1.100. If you like to
change the IP address, follow the instructions bellow.
1. Connect the converter ACL800FL-CONV-W directly to the
PC.
2. Change the IP address of the PC to the same range as
the converter’s IP address (192.168.1.XXX)
3. Open Browser or ACL800 BioManager (as explained in
“Configuration” on page 2) and change the IP to the
desired one.
4. Save.
RS485
Reset Termination resistor
120
Ω
LEDs
Biometric readers
RS485 1 km max. / 31 units
ACL800FL-CONV-W
RS485ACL800
Biomanager
TCP/IP
ACL800FL-CONV-W
PC
Power
supply
TCP/IP
+
−