Ariston Piccolo ARKS 50, Инструкция по установке

Страница: 8 / 20

Supplied By www.heating spares.co Tel. 0161 620 6677
27
INSTALLATION NORMS (for the installer)
DESCRIPTION OF THE WATER HEATER
(see fig. 4)
A. Pilot lamp B. Control knob C. Front cover
TECHNICAL CHARACTERISTICS
For the technical characteristics of the appliance, please refer to the information provided on
the data plate.
This appliance complies with the provisions set forth in the EEC/89/336
EMC directive on electromagnetic compatibility.
GB
The installation and set-up of the water heater must be carried out by a competent person in
conformity with the applicable norms in force and with any provisions set forth by local authorities
and public health bodies.
Warning: this is an open outlet appliance (no pressure) and can be installed in one point of
use only. The electrical and plumbing connections must be made in compliance with the
applicable norms in force.
The appliance heats water to a temperature below boiling point. It must be linked up to a mains
water supply according to the appliance perfor mance levels and capacity.
Before connecting the appliance, it is first necessary to:
- Check whether the characteristics (please refer to the data plate) meet the customer’s
requirements.
- Make sure the installation conforms to the IP degree (of protection against the penetration
of liquids) of the appliance according to the applicable norms in force.
- Read the instructions provided on the packaging label and on the appliance data plate.
Installing the appliance
!
WARNING! Follow the general warnings and the safety norms listed at the
beginning of the text and keep to all the instructions given under all circumstances.
Capacity l 5
Power W See data plate
Voltage V See data plate
Mains water pressure Pa (bar) 0
Weight kg 2,6
This appliance was designed to be installed only inside buildings in compliance with
the applicable norms in force. Furthermore, installers are requested to keep to the
following advice in the presence of:
Degree of protection
against water
M a d e i n I TA LY
Model
Maximum working
pressure
Absorbed power
Power supply voltage
Mains frequency
Date of
manufacture
Capacity
Approvals Current intensity