Ariston MCA 15 NA, Инструкция по эксплуатации, Страница: 17 / 76

NA
17
WATER HARDNESS
Water hardness varies according to geographical
region. Hence, the machine must be regulated for
the hardness of the water used. This is expressed on
a scale of 1 to 4. The
appliance is already
programmed for
average hardness (3).
To regulate hardness,
briefly dip (1 second)
the strip provided in
water.
Next, shake the strip
gently to eliminate
excess water. After one
minute the test results are visible. Check the number
of squares that have changed colour.
Use the key to select this function:
WATER HARDNESS *
WATERFILTER
Enable it with the key.
The display shows:
WATER HARDNESS
HARDNESS 3
Select the right hardness using the key (e.g. 2
squares = Hardness 2) and save using the key.
! Warning: this setting allows the machine to notify
when it is time for descaling treatment.
The display shows:
READY FOR USE
DECALCIFY
WATER FILTER (where installed)
This function provides better management of the
“water filter (where installed), notifying the user when
the filter is to be replaced.
! The function must be enabled when installing the
water filter for the first time.
Use the key to select this function:
WATERFILTER *
TEMPERATURE
Enable it with the key.
The display shows:
WATERFILTER
OFF
Use the key to select
WATERFILTER
ON
and press the key to confirm.
! The “RESET” must be given whenever a new
cartridge filter is installed.
For this command, use the key to select the
function:
WATERFILTER
RESET
Enable it with the key.
TEMPERATURE
This function regulates the temperature of the water
for coffee (high, medium and low).
Use the key to select the function:
TEMPERATURE *
PROGR. COFFEE LENG.
Enable it with the key.
The display shows (e.g.):
TEMPERATURE
MEDIUM
Select the required temperature by pressing the
key and use the key to save your choice.