
8
ARISTON DISHWASHER - Instructions for installation and use
D
ISHWASHER
If the power socket
to which the
appliance is
connected is not
compatible with the
plug, replace it with
a suitable plug rather
than using adapters
or multiple plugs as
these could cause
overheating or
burns.
Installation and moving
After having bought or moved your dishwasher to another home, a correct installation
ensures that your dishwasher will operate smoothly and efficiently.
provided between the hose and
connection, taking care to
screw it tightly onto the tap (see
fig. 2).
If the water pipes are new or
have not been used for an
extended period of time, let the
water run to make sure that the
water is clear and free of
impurities. If this precaution is
not taken, there is a risk that the
water inlet can get blocked and
damage the appliance.
Drain hose connection.
Fit the drain pipe into a drain
line with a minimum diameter
of 4 cm or place it over the sink.
Avoid restricting or bending it.
Use the special plastic elbow
provided (see figure) to
position it in the best possible
way. The part of the pipe
marked with the letter A should
be between 40 and 100 cm
above the ground.
The pipe should not be
immersed in water.
Electrical connection.
First of all, check that the mains
voltage and frequency values
correspond to those stated on
the rating plate located on the
stainless steel inner door of the
appliance and that the electrical
system to which the
dishwasher is connected is
sized for the maximum current
indicated on said rating plate.
Choose where you want to
install your dishwasher, you
can even place it so that its
sides or back panel are side by
side with furniture or up against
the wall. The dishwasher is
provided with water supply and
drain hoses, which can be
directed towards the left or
right to facilitate appropriate
installation.
This dishwasher model can be
built under a single worktop
(please read the relevant
instruction sheet).
Levelling.
Once the appliance is
positioned, adjust the feet by
screwing them in or out
depending on how high you
want it and to level it so that it
is horizontal. Make sure that it
is not inclined more than 2
degrees. If the appliance is
level, it will help ensure its
correct operation.
Cold water connection.
This electric household
appliance should be connected
to the water mains using the
cold water supply hose
provided with the appliance
only. Do not use a different
hose. In the event of replace-
ments, use original spare parts
only.
Connect the cold water supply
hose to a 3/4 gas threaded con-
nection, placing the small filter
Your dishwasher has arrived
A
A
Fig.2
The special plastic
elbow should be
fastened firmly onto
the wall to prevent
the drain hose from
moving and allowing
water to spill outside
the drain.
Earth: indispensable
safety.
Only now can you plug the
appliance into a socket
provided with an efficient earth
connection (the system's
earthing is a guarantee of safety
provided for by law, make sure
your system has it).
Power supply wire.
Check the power supply wire
on a regular basis; if it is
damaged, we recommend you
have it replaced by an
authorised technical Assistance
service centre.
The plug
The dishwasher plug
must be accessible that
maintenance can be
done safely.
Содержание LL 64
