Ariston LL 64, Инструкция по установке и эксплуатации, Страница: 11 / 16

ARISTON DISHWASHER - Instructions for installation and use
7
D
ISHWASHER
Never without salt
Loading the salt.
Always use salt which is intended
for dishwasher use.
The salt container is situated
underneath the lower rack, fill it
up as follows:
1.Pull out the lower rack
completely, unscrew and
remove the container cap
2. Is it the first time you load the
salt? First fill the container up
with water (you won't have to
do this again next time)
3. Put the dishwasher funnel on
the hole and pour in
approximately two kilos of
salt. It is normal that some
water comes out of the
container.
4. Screw the cap back in place
carefully.
Water in your home
When should I load the salt?
The salt container should be
filled up when the low salt
indicator light " S " flashes. Once
you have loaded the salt for the
first time, it is normal that the
low salt indicator light stays on
or flashes for about 5 consecu-
tive cycles.
Salt adjustment
Your dishwasher can adjust its
salt consumption according to
the hardness of the water in your
home. This way, you can optimise
and customise your dishwasher's
salt consumption (not too much,
nor too little).
To adjust salt consumption, do as
follows:
1. Unscrew the salt container cap
2. There is an arrow on the neck
of the container (see figure):
if necessary, turn the arrow
anti-clockwise from the "-"
setting to the "+" setting.
Select the arrow position
depending on the water hardness,
referring to the table provided.
You don't know how
hard the water in
your home is? Ask
the company that
supplies water in
your area.
Water hardness varies according to where you live. If the water in your home is hard, without water
softening, incrustations would form on your dishes. Your dishwasher is fitted with a water softener
which uses special salt to get rid of limescale in the water.
Using your electric household appliances
wisely helps you make savings and is good for
the environment.
Savings are easy
Maximum load.
To optimise consumption levels, try to use the
dishwasher with a full load only. If it takes quite
some time to fill up your dishwasher, use the soak
cycle to avoid the formation of bad odours and caked-
on food.
The right wash cycle.
Select the most suitable wash cycle for the type of
load you have placed in the dishwasher. The choice of
wash cycle depends on the type of dishes to wash
and on how dirty they are. To select the right wash
cycle, please consult the wash cycle table on page 7.
How to look after and protect
the dishes you hold dear
■
For particularly delicate
dishes, we recommend you
use the specific wash cycle
offered by your dishwasher.
Suggestions and advice for you.
Apart from making
you save time and
energy, your
dishwasher disinfects
your dishes, washing
them at a high
temperature.
■
Silver plates and serving
dishes should be washed
immediately after use,
especially if they have
contained salt, eggs, olives,
mustard, vinegar, fruit juices
and cooked vegetables.
■
Almost all silverware can
be cleaned in a dishwasher.
There are two exceptions:
old silverware and
silverware decorated with
an oxidising agent. Hot
water can loosen the
handles on old silverware
ad wear off the decorations
on the other.
Never let silverware come
into contact with other
metals: you will thus avoid
stains and blackening
To prevent rust from
forming, load the salt
just before beginning a
wash cycle.
Water Hardness
Clarke
degrees
°fH mmol/l
Selector
position
Salt
consu-
mption
(grams/-
cycle)
Autono-
my
(cycles\2-
kg)
0 - 14 0 - 17 0 -1,7 / 0 /
14 - 36 18 - 44 1,8 - 4,4 "-" 20 60
36 - 71 45 - 89 4,5 - 8,9 MED 40 40
>71 > 89 > 8,9 "+" 60 25