Ariston LFC2C19 Скачать руководство пользователя страница 6

6

LOADING THE RACKS

UPPER RACK

Load delicate and light dishes: glasses, cups, saucers, low salad bowls.

(loading example for the upper rack)

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place 
bulky crockery in the lower basket and low position to make the most 
of the tip-up supports by creating more space upwards and avoid 
collision with the items loaded into lower rack.
The upper rack is equipped with a 

Upper 

Rack height adjuster

 

(see figure)

, without 

pressing the levers, lift it up by simply 
holding the rack sides, as soon as the rack is 
stable in its upper position. 
To restore to the lower position, press the 
levers 

A

 at the sides of the rack and move 

the basket downwards.

We strongly recommend that you do not 
adjust the height of the rack when it is 
loaded.
NEVER raise or lower the basket on one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be positioned at 
three different heights to optimize the 
arrangement of crockery inside the rack.
Wine glasses can be placed safely in the 
foldable flaps by inserting the stem of each 
glass into the corresponding slots.
For optimum drying results incline the 
foldable flaps more. To change the 
inclination, pull up the foldable flap, slide it 
slightly and position it as you wish.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should 
ideally be placed at the sides to avoid interferences with the spray arm.
The lower rack has tip-up supports which can be used in a vertical 
position when arranging plates or in a horizontal position (lower) to 
load pans and salad bowls easily.

(loading example for the lower rack)

CUTLERY BASKET

The basket is equipped with top grilles 
for improved cutlery arrangement. The 
cutlery basket should be positioned only 
at the front of the lower rack.

Knives and other utensils with sharp 
edges must be placed in the cutlery 
basket with the points facing 
downwards or they must be 
positioned horizontally in the tip-up 
compartments on the upper rack.

Содержание LFC2C19









Отзывы: