3
EN
PROGRAMS TABLE
The Eco 50° wash cycle adheres to the regulation standard
AS/NZS 2007
. Although it has a longer duration than other wash cycles it uses less energy and
is less harmful to the environment.
*) Not all options can be used simultaneously.
**) The duration of the program shown on the display or in the booklet is an estimate calculated on standard conditions. The actual time may vary
depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load,
load balancing, additional selected options and sensor calibration. The sensor calibration can increase program duration up to 20 min.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
WARNING: Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the
skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after
completion of the wash cycle.
Program
Dr
y
ing
phase
Available options
*)
Detergent
dispenser
Duration of
wash program
(h:min)
**)
Water
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
Tub B
1. Eco
50°
2:40
12
0.86
2. Intensive
65°
-
2:30
16.5
1.65
3. Everyday
55°
-
2:00
16
1.35
4. Express 30’
50°
-
-
0:30
8.5
0.50
5. Soak
-
-
-
-
0:10
4
0.01
PROGRAMS DESCRIPTION
Instructions on wash cycle selection.
ECO
Normally soiled crockery. Standard program, the most efficient in terms
of its combined energy and water consumption.
INTENSIVE
Program recommended for heavily soiled crockery, especially suitable
for pans and saucepans (not to be used for delicate items).
EVERYDAY
Everyday cycle, that ensures optimal cleaning performance in shorter
time.
EXPRESS 30’
Program to be used for lightly-soiled dishes with no dried food
residues. (Ideal for 2 place settings).
SOAK
Crockery to be washed later. No detergent to be used with this
program.
Notes:
Optimum performance levels when using the “
Express
”” program can
be achieved by observing the maximum amounts of specified place
settings.
To reduce consumption even further, only run the dishwasher
when it is full.
