Ariston EGIS PREMIUM S 25, Инструкции по установке и обслуживанию

Страница: 46 / 52

46
settings - adjustment - problem identi fi cation menus
Accessing the settings - adjustment - problem identi fi cation
menu
The boiler can be used to manage the heating and domestic hot
water production system in its entirety.
Navigation within the menus enables the boiler connected
peripheral units to be customised, optimising operation for
maximum comfort and maximum saving. It also provides important
information relating to the e ffi cient operation of the boiler.
The parameters are listed in the following pages.
The various parameters can be accessed and modi fi ed using the “+”
and “-” buttons and the “+” OK and “-” ESC buttons (see fi g.
below).
O K
E S C
1 6
1. Programming “+” and “-” key, to access and modify the
parameter
6.
Programming
“+” OK
key, to save the changes of parameters
value
Programming “-” ESC key, to exit from the parameters
The information relating to the parameters are indicated on the
display.
Caution! The menus reserved for quali fi ed technicians may only be
accessed after setting the access code.
To access to the parameters proceed as follows:
1. Press simultaneously the
“+”
e
“-”
buttons for 5 seconds
The display requires the acces code,
222 222
will appear on the display
2. Press the
“+”
button to select code
234 234 .
3. Press the
“+” OK
button to access the
parameter list
4. On the display will appear the fi rst
parameter 220 220
5. To select the parameters press the
“+”
button.
- exemple: modify the 231 231 parameter
6. Press the
“+” OK
button to access the
parameter. The display will indicate the
value “es: 70 70 ”
7. Press the “+” and “-” buttons to select the new value, e.g.
“ 75 75 ”.
8. Press the
“+” OK
button to save the change or press
“-” ESC
to
exit without saving.
To exit, press the “-” ESC button until the normal display screen is
restored.