7
manuale d’uso
Auto button - Temperature adjustment activation
The AUTO function enables boiler operation to be adapted to
external environmental conditions and to the type of system it is
installed in.
Comfortable temperature is reached inside the room in the quickest
way possible, without wasting money, energy or efficiency, while
substantially reducing the amount of wear experienced by the
components.
Contact one of our qualified technicians, who will advise
you on the devices connectable to the boiler and will
program it according to the system.
In normal boilers the water temperature inside the heating
elements is usually set to a high value (70-80°C), thereby ensuring
effective heating during the few really cold winter days. It then
becomes excessive on less cold days (of which there are many)
more typical of the autumn and winter seasons. This habit leads
to excessive room heating after the thermostat has been switched
off, resulting in energy waste and uncomfortable conditions inside
the room.
The new AUTO function “takes control” of the boiler and selects
the best operating regime based on environmental conditions,
external devices connected to the boiler and the performance
required. It constantly decides at which power level to operate
based on the environmental conditions and the room temperature
required.
Change of gas type
Our boilers are designed to function either with Natural Gas (meth-
ane) or L.P.G. gas. If you need to changeover from one gas to the
other, one of our Authorised Service Centres should be contacted.
Maintenance
Schedule an annual maintenance check-up for the boiler with a
competent person.
Correct maintenance always results in savings in the cost of
running the system.
