7
GB
Function
Effect
Comments
Enabled with
programmes:
Super
Wash
Allows for an impeccable
wash, visibly whiter than a
standard
Class A
wash.
1, 2, 3, 5, 6, 10
Mini
Load
Use this function when
the laundry that needs to
be washed is equal to or
less than half the
recommended max. load
(see Programme table).
Reduce the amount of detergent accordingly.
1, 2, 3, 4, 5, 6, 8,
10, 11, 12, Rinse
cycle.
Easy
Iron
This option reduces the
amount of creasing on
fabrics, making them
easier to iron.
If you set this option, programmes 5, 6, 9, 11, 12 will be
suspended, leaving the laundry to soak (Anti-crease) and
EASY IRON button will flash:
- to conclude the cycle, press the START/RESET button
or the EASY IRON button;
- to run the draining cycle alone, set the knob to the
relative symbol and press the START/RESET button.
2
(if the temperature
is equal to or less
than 60°C
), 3, 5, 6, 9,
10, 11, 12, Rinse
cycle.
Service
Tr
oubleshooting
Precautions
Care
Programmes
Detergents
Installation
Description
Personalisations
Setting the spin cycle
If, when the appliance is switched on, the KNOB is positioned
on a programme with a spin cycle, a fixed
appears. Press
button
and the maximum spin speed allowed for the
programme set will be displayed, and the
icon flashes.
Press it again and the values lower until they reach OFF, which
indicates that the spin cycle has been excluded (press it again
to go back to the maximum value); stop on the desired speed,
after approximately 2 seconds the setting is accepted: the
symbol
remains fixed. The spin cycle setting is enabled with
all the programmes except for 9 and the Draining cycle.
Setting the temperature
If, when the appliance is switched on, the KNOB is positioned on a programme for which the temperature
needs to be regulated, a fixed
appears. Press button
and the maximum temperature allowed for the
programme set will be displayed and the
icon flashes. Press it again and the temperature lowers until it
reaches OFF, which indicates a cold wash cycle (press it again to go back to the maximum value); stop on the
desired value, after approximately 2 seconds the setting is accepted: the symbol
remains fixed.
The temperature adjustment is enabled with all wash programmes.
N.B.:
When selecting programmes 2 and 4 the
max.
temperature will not be displayed; the recommended
temperature will be displayed instead (60°C and 40°C respectively). To select the
max.
temperature, press the
button again until 90°C appears on the display.
Setting the Delay Timer
Press the button
and you will see the word OFF on the display, while the relative symbol flashes.
Press the button again and "1h" appears, that is, a delay of one hour (this can reach up to 24h); stop on the
"desired" delay; after approximately 2 seconds the setting is accepted, following which, the time for the set
programme appears on the display and the symbol
remains on.
If you now press the START/RESET button, the set "delay" appears; this decreases every hour until the start of
the cycle. In this phase, the "delay" can only be modified by decreasing it.
The Delay Timer regulation is enabled with all programmes.
Keyboard Lock
(see page 5)
.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.
If you set a function that is incompatible with another function you selected previously, only the last one
selected will be enabled.
Option buttons