16
GB
How to Start the Appliance
NOTICE
After the appliance has been delivered, stand it in the
upright position and wait approximately 3 hours be-
fore connecting it to the electrical outlet to guarantee
that it operates properly.
Before placing foodstuffs in the refrigerator or freezer, clean
the interior well with warm water and baking soda.
Motor protection time.
This model is provided with a motor protection system.
Therefore, if the compressor does not start immediately
after the user has turned it off, do not worry as it will
start automatically after approximately 8 minutes.
Once you have plugged the appliance into the mains socket,
make sure the display is on.
Freezer compartment
When you turn the appliance on (by turning the appliance ON/
OFF knob "
B
" to the required freezer compartment operating
temperature), we recommend you enable the
SUPER FREEZE
function to speed up the cooling process inside the compartment;
when the latter has reached the optimal temperature, the
function will be disabled and you may place the frozen foods
inside the freezer.
Refrigerator compartment
When you turn the refrigerator compartment on (by turning
knob "
A
" to the required refrigerator compartment operating
temperature), we recommend you enable the
SUPER COOL
function to speed up the cooling process inside the
compartment: after a few hours, you may place food inside
the refrigerator.
Temperature settings
If the compartment concerned is switched off, the word
OFF
will appear on the relative indication space on the display (
E
for the refrigerator and
F
for the freezer). If the compartment
is switched on, then the temperatures set at that time will
appear. To change them, turn the relative knob directly (
A
for the refrigerator and
B
for the freezer).
The refrigerator compartment can be set to between
+2°C
and
+8°C
, while the freezer compartment can be set to a tem-
perature of between
-18°C
and
-26°C
. The temperature in
both cases can be increased or decreased by
1°C
at a time.
When the
HOLIDAY
function is enabled, temperature
regulations cannot be made, but the appliance automatically
sets itself to the best setting for the situation:
+12°C
for the
refrigerator compartment (if enabled) and -
18°C
for the
freezer compartment.
How to use the functions:
Function symbol during normal operation.
Function selected (outline flashing).
Function enabled (outline on)
Enabling/disabling the functions
Press the
MODE
button
"C"
as many times as necessary for
the red outline of the function you wish to act on to light
up: this indicates that the function has been selected and is
ready to be enabled or disabled. Now you can enable or
How to use the display
disable the selected function using the
SELECT
button
"D"
.
NOTE:
if you do not confirm your selection by pressing the
SELECT
button within five seconds of the last action
performed on the display, the latter shall go back to displaying
the function previously set and indicate that no new
modification has been made.
The
SUPER COOL
function is linked to the refrigerator
compartment and when the latter is switched off, no action
whatsoever will be possible on the former, other functions
foresee an operation that can create conflicts (for example,
when the
HOLIDAY
and
SUPER FREEZE
functions are
enabled simultaneously), in this case a pre-set priority is taken
into consideration in order to help you operate the appliance.
The
SUPER FREEZE
function features a double mode of
operation (see paragraph on operating the freezer
compartment).
Enabling/disabling the DEMO mode:
To run a demonstration of the display operation while
keeping the appliance turned off, just enable the
DEMO
mode.
Enabling
:
- set the freezer temperature knob to
0
;
- keep the two buttons “
Select
” and “
Mode
” pressed for
approximately 5 seconds, until you hear the buzzer and the
two words “
OFF
” and “
OFF
” flash on the display; these
words will flash for the entire duration the
DEMO
mode is
enabled.
Disabling
:
- set the freezer temperature knob to
0
;
- keep the two buttons “
Select
” and “
Mode
” pressed for
approximately 5 seconds, until you hear the buzzer and the
two words “
OFF
” and “
OFF
” on the display stop flashing.
Содержание BCS 333 A VE I
Страница 39: ......