Ariston 3319089, Инструкция по установке и эксплуатации

Страница: 43 / 222

\ 43
GB
5. CONNECTING TO THE INTERNET WITH
THE APP OR WEB BROWSER
After installing the product, switch on the heating system. The
gateway switch on as it is powered by the BridgeNet BUS.
1. For several moments, the gateway performs its startup proce-
dure, during which all the LEDs fl ash red in sequence.
2. After a few seconds, the BUS LED turns green and the WEB
LED remains lit steady red. The device is now awaiting con-
fi guration and Sensys display (if the connectivity menu is avail-
able) visualises the “
” icon.
WEB
BUS
A.P
.
WEB
BUS
A.P
.
5.1 WI Fi Con fi guration
Before running the gateway Wi-Fi confi guration procedure, download the Ariston Net
app from the app Stores and check that the ADSL router is working correctly.
WARNING! Ariston Net supports the following encryption for Wi-Fi networ-
ks: WEP, WPA/WPA2 Personal
5.1.1 Con fi guration using Sensys
(if the connectivity menu is available, otherwise go to Paragraph 5.2)
1. Press the OK button to access the Menu. Turn the
knob and select the “Connectivity settings” menu.
Press OK.
2. Check that Ariston Net is available in your country
and if it is, press OK.
3. Turn the knob to select “Network confi guration
with AP”. Press OK.
4. After at most 40 seconds, Sensys displays the AP
icon (steady) and the gateway creates a new Wi-
Fi network that remains active for 10 minutes, after
which you will need to repeat the procedure.
5. Follow Sensys’s prompts, open the network set-
tings of your internet device (smartphone, PC,
Tablet...) and search for available Wi-Fi networks.
Select the Remote GW Thermo network. Now go
to paragraph 5.2.
DHW Settings
Connectivity Settings
CH Settings
Screen Settings
Serial Number
ON/OFF Wi-Fi Network
Factory data reset
Signal Level
Network configuration via AP