Aristo 320, Инструкция по эксплуатации

Страница: 5 / 12

-- 45 --
bu09d12e2
3 INTRODUCTION
LUD 320 and LUD 450 are transistorised welding rectifiers intended for MMA (Manu-
al Metal Arc), MIG/MAG (semi--automatic) welding ,TIG welding and arc gouging.
LUD units are used in combination with a controller and wire feed unit
MEK 4C, MEK 44C, MEK 20C and MLC 30C.
The welding rectifiers are fan cooled, and fitted with a thermal cut--out to prevent
overheating.
The cut--out is reset automatically when the welding rectifier has cooled down.
See page 140 for details of ESAB’s accessories for the power source.
3.1 Setting control
All the settings are controlled by the PUA1 setting box.
For operating instructions see the programming manual 456 685--xxx.
4 TECHNICAL DATA
LUD 320/320 W LUD 320/320 W
Voltage 400V 3 ~ 50/60 Hz 230/400/500V 3 ~ 50Hz
208/230/460/475V 3
~
60 Hz
Permissible load at
100% duty cycle
60% duty cycle
270A / 30,8V
320A / 32,8V
270A / 30,8V
320A / 32,8V
Setting range
MIG/MAG 15A/15V(8V)--320A/30V 30A/15V(8V)--320A/30V
Setting range
MMA 16A/20V--320A/32,8V 10A/20V--320A/32,8V
Setting range
TIG 4A/10V--320A/22,7V 10A/10V--320A/22,7V
Open circuit voltage
MIG/MAG 65--80 V 65--80 V
Open circuit voltage
MMA/TIG 50--60 V 50--60 V
Open circuit power 520 W 520 W
Efficiency,
at max current MIG/MAG 82%
MMA 84,5%
TIG 82%
MIG/MAG 82%
MMA 84,5%
TIG 84,5%
Power factor,
at max current MIG/MAG 0,85
MMA 0,85
TIG 0,80
MIG/MAG 0,85
MMA 0,85
TIG 0,80
Enclosure class IP 23 IP 23
Weight kg 96/110 143/157
Dimensions , lxwxh 910x642x835 910x642x835
Application classification
GB